Home > News > Content
Bluetooth Earphones How To Connect The Phone?
Jul 24, 2017

  bluetooth earphones how to connect the phone?

  1, under normal circumstances, the bluetooth earphones into the paired state, only need to hold down the boot button for 10 seconds or so do not let go, the headset will turn from the power switch to the pairing state, the performance of the headset lights red and blue flash Move (some is a long light of a color). And then use the phone to search for Bluetooth devices, you can find your headphones.

  2, some of the headset factory settings are more complex, first open the headset, then press and hold +, - 10 seconds or so, then the lights will be red and green flashing alternately, bluetooth earphones so you can use the phone to search for Bluetooth devices. 36W is in the headset after the boot, while holding down the boot button and + 10 seconds or so, the other steps are the same as ordinary headphones.

  3, the headset into the paired, the phone to search for Bluetooth devices, the general mobile phone with about 5 seconds to search for headphones, and then select the phone you find the bluetooth earphones device, the phone will prompt you to enter the password. Most of the phone password is 0000 or 1234, but there are also individual manufacturers set up in your headset manual will have a detailed record.

  4, when the phone search to the headset, and you also correctly enter the password, not that your phone can use bluetooth earphones to answer the phone. Now a lot of mobile phones in the Bluetooth device after the need to connect with the headset, if your phone is not set up in the connection with the headset, or can not answer the phone. Of course, some mobile phones do not need you to connect the headset, bluetooth earphones and as long as the match is successful, the phone will be very intelligent to headphones connected.

  Another way:

  The phone to open the Bluetooth program, select - match equipment - options --- new pair of equipment - to determine, while holding down the headset key for 5 seconds (in the case of headphone power off), the headset will enter the paired state, If the phone search headphones (if the same time code: 0000) to connect the headset and set the authorized device can be.